When you install a new Exchange Server 2013 Mailbox server a database is automatically created on the server as well.
The database is located in the Mailbox folder of the Exchange installation path, which by default is the C: drive therefore a mailbox database will be placed in a path such as:
C:\Program Files\Microsoft\Exchange Server\V15\Mailbox\Mailbox Database 1
Usually this default location is not suitable, so you have two choices:
- Remove the database and create a new one in the desired path
- Move the existing database to the desired path
To move a database to a new location use the Move-DatabasePath cmdlet in the Exchange Management Shell.
Before you proceed please be aware that:
- the command must be run while logged on to the mailbox server hosting the database
- this process requires that the database be dismounted while the move takes place, making it unavailable for mailbox users
- this process should not be followed for databases that are replicated within a Database Availability Group
- this process cannot be run at the same time as a backup is in progress
Also consider that for non-replicated databases the best practice is still to separate the database file and transaction logs onto separate disks.
To move an Exchange 2013 database named “Mailbox Database 1” to a new EDB file location of E:\Mailbox Database 1 and a new logs folder of F:\Mailbox Database 1 the following command is used.
[PS] C:\>Move-DatabasePath "Mailbox Database 1" -EdbFilePath "E:\Mailbox Database 1\Mailbox Database 1.edb" -LogFolderPath "F:\Mailbox Database 1" Confirm Are you sure you want to perform this action? Moving database path "Mailbox Database 1". [Y] Yes [A] Yes to All [N] No [L] No to All [?] Help (default is "Y"): y Confirm To perform the move operation, database "Mailbox Database 1" must be temporarily dismounted, which will make it inaccessible to all users. Do you want to continue? [Y] Yes [A] Yes to All [N] No [L] No to All [?] Help (default is "Y"): y
To check whether the database is mounted and accessible again you can run the following commands.
[PS] C:\>Get-MailboxDatabase -Status "Mailbox Database 1" | Select Name,Mounted Name Mounted ---- ------- Mailbox Database 1 True [PS] C:\>Test-MAPIConnectivity -Database "Mailbox Database 1" MailboxServer Database Result Error ------------- -------- ------ ----- E15MB1 Mailbox Database 1 Success
Comments for this blog post are now closed; please contact team@practical365.com for any additional questions and comments, thank you.
Paul,
Thanks a bunch for the post, it has absolutely helped us; however, after the migration we are seeing a very strange behavior.
The edb file located in it’s new location is not growing. The size has not changed since the migration was complete and the modification time shows the time just after the migration. Mail is in fact flowing in both directions and the transaction logs are growing in number as expected. The transaction logs even prune properly after we run a backup. But still the edb file has not changed.
The exact command that we used is:
Move-DatabasePath “Mailbox Database 1602191925” -EdbFilePath “F:\ExchangeData\Mailbox Database 1602191925\Mailbox Database 1602191925.edb” -LogFolderPath “E:\ExchangeData\TransactionLogs\Mailbox Database 1602191925”
I have been running the following command:
Get-MailboxDatabase -Status | select Name, DatabaseSize,AvailableNewMailboxSpace
The output being:
Name Database Size AvailableNewMailboxSpace
Mailbox Database 1602191925 228.2 GB (245,081,571,328 bytes) xx.xx MB
The ‘AvailableNewMailboxSpace’ value has changed each time, sometime up and sometimes down, but only 10MB this way or that..
This is a production environment with large amounts of email passing through at all times.
Any insight would be very very appreciated..
I have no idea how I have not noticed after all these years that the ebd files are updated at wildly varying intervals. It’s only now, during/after this migration when I was paying close attention to the database file that I noticed that it did not update.
I always understood the write-forward nature of Exchange to be; continuously write to the transaction logs, periodically (like minutes, not days or weeks) write that data into the database and prune the logs when the database has been backed up.
However, I now realize that this was wrong and that the logs can be pruned and the database does not get updated. Soo, where exactly is the updated info held? For example I just referenced a server that we’ve had in production for years. It’s database last updated weeks ago but the transaction logs are removed nightly with the backup job. Where is the data held before it’s written to the database if the logs are removed? Memory buffer, e.g. RAM? If so, what happens if the server suddenly loses power?
Scratch all that.. I have figured it out..
The date modified timestamp will generally get updated on an Exchange database when either of the things happen
1. The EDB file size is extended in order to accommodate data that does not fit into whitespace that currently exists in the database.
2. Or the database is dismounted and all open handles to the files are released.
We had a lot of whitespace which meant that the database file did not get marked as modified by Windows.. simple..
Thanks again for the original post..
I apologize if this has been asked already, but if the database i want to move has the arbitration mailbox, will this still work or is there a different process. I’m moving around mailboxes to a new disk with new databases but the problem i’m having is that the arbitration mailbox is on the same disk that is running out of space so each move lowers the existing drive and i don’t have much space with the existing disk to expand anymore.
I don’t have circular logging on so not sure if that would help at this point or not.
Hi Paul,
I need to move all databases from the passive database server to a new partition because it’s almost full and it’s made out of spanned disks.
Will something like this work?
-stop the replication
-put the server in maintenance mode
-move everything to the new partition
-change the letter to the new partition to be the same as the old one so the edb file path will stay the same – logs are on a different partition
-take the server out of maintenance and resume the replication
Hi,
I have Exchange 2013 environment with CU19, Please let me know if I can create more than one database on Single Drive? is this supported by Microsoft?
Thanks,
Azad
Hi,
Does this commend move all the data or does that have to be done manually?
Thanks
Jonathan
The Real Person!
The Real Person!
You have a choice. If you use Move-DatabasePath, the files (data) are moved for you. If you use it with the -ConfigurationOnly switch, only the config is updated and you need to manually move the data.
https://docs.microsoft.com/en-us/powershell/module/exchange/mailbox-databases-and-servers/move-databasepath?view=exchange-ps
Dear Sir,
Hope to find guide on moving path with DAG
Paul, I need to move my log files only to a different partition. What command would I use? Thanks in advance!
The Real Person!
The Real Person!
Same cmdlet, just use the -LogFolderPath parameter to only move the logs.
I want to move database logs folder path only, this database is DAG Memeber
i tried with Move-DatabasePath -Identity database01 -LogFolderpath X:Folder
i received the below error:
Move-DatabasePath is not allowed for replicated databases. For detailed steps to change the location of a replicated.
Please help me
I have a virtual machine wrongly configured for exchange 2013, because the drive c is configured with only 22gb only. it has been working for 2 years now as the mailbox store increased… the exchange went down.
i tried moving the database to drive d: that has 40 gig free. after successful move, it doesnt mount.
Maybe i did not move it using command line… i moved it using the path in the properties of mailbox store.
it has error, IDno: c1041724 when mounting, as i researched MS says free up space in drive, does it mean free up space in drive d or drive c?
to make it work temporarily… i again moved it back to drive c: it mounted but my outgoing wont work.. it piled up the queue… maybe because the free space in drive c is only 480mb.?
help me pls…
thanks
Ramon
The Real Person!
The Real Person!
Try moving it the way that I showed in the article above.
Thanks for help
Is there any way to move a database from a server to an other server those are in unique organization but we don’t have DAG?
The Real Person!
The Real Person!
Create the new mailbox database on the other server and perform mailbox moves.
Thank you very much 😀
Hi Paul, I am moving my DB to another drive. DB size is around 50 GB. How much time it will take? From past 2 hours the command is stuck at ‘copying edb file..’ Shall I cancel the operation and move mailboxes instead to other drive.
The Real Person!
The Real Person!
Yes, if the database already hosts a large amount of data you are much better off creating a new database and moving mailboxes.
Hi Paul
Great article However, I ran the command move-databasepath -identity “Mailbox Database 09888363244” -Edbfilepath “e:MailboxD1Mailbox Database 09888363244.edb”
To move the database to the new path in the same server but difference partition . Was logged into and running the command from my exchange server. However, I get the error:
The operation couldn’t be performed because object ‘mailbox Database 09888363244’
+ categoryInfo :Notspecified : [Move-DatabasePath]
+ FullyQualifiedErrorld : 55A980E4,Microsoft.Exchange.Management.SystemConfiguration
+ PSComputerName : mail.xyz.com
————-
Could you help me please ….
Paul, Thank you for all the great information on Exchange. I recently discovered the new “feature” of Exchange 2013 CU11 called EMS Anchoring. Now that my EMS session is anchored to a particular server it appears I cannot run Move-DatabasePath on databases unless they are on the server my administrator mailbox is on and I’m running EMS on that server.
We have a brand new environment with 6 Exch 2013 CU11 servers. Today I went to run the Move-DatabasePath command. I kept getting errors that the command cannot be run for mailbox databases on remote servers. I was on server 01 but my admin mailbox is on server 03. So I logged into server 03 and was able to successfully run the Move-DatabasePath command on a database on server 03. So now how do I successfully run the Move-DatabasePath command on server 01 if I’m proxied to server 03 for all of my EMS sessions? Not sure this was fully thought out. Any guidance is appreciated.
The Real Person!
The Real Person!
Hi Matthew, the best blog post to read is this one:
https://exchangemaster.wordpress.com/2016/01/06/mailbox-anchoring-affecting-new-deployments-upgrades/
Sounds like opening PowerShell on the server and adding the snapin manually would do the trick. Otherwise, move your admin account’s mailbox (or create a new one for the task).
Thank you Paul. I had seen Andrew’s article before and it is helpful. I can get the Move-DatabasePath command to work on the local server when I load the snapin. I haven’t found a way to successfully execute the command remotely yet. I either get the error that the command can’t be used on a remote server or I get the “Active Directory operation failed on . The supplied credential for ‘XXXYYY’ is invalid.” error. I’ll keep digging to see what I can get working for remote scripts.
The Real Person!
The Real Person!
Consider that during Exchange setup you can set the name and path of the first database that is created on the server, which avoids this issue.
And for any requirement later on when the server is in prod, a new database followed by mailbox migrations is less disruptive than moving the path of a database that is in use by end users.
As for getting this working on remote servers, unless you’re doing this task on a daily basis I wouldn’t spend any time trying to find a better solution. I expect that future CU’s from Microsoft will relieve some of the pain points that the mailbox anchoring change introduced.
Hi Paul, great site with lots of info! I am wondering if you can provide me with some direction on migrating mailboxes off of our current databases/volume onto a different database/volume. We have 2 Exchange 2013 servers running in a DAG with 6 databases. I want to consolidate the remaining mailboxes, totaling about 20 GB or so (most have been migrated up to 365) that we still need on-prem into 1 database and then move that database onto a separate smaller volume located on both Exchange servers.. After moving the database over, I would like to delete the old volume ( 3 TB) and reuse that disk space on our SAN for other things. What is the best way to go about this? Do you have any step by step instructions for my situation? Would it be best to create a new DB on the existing volume, move mailboxes to that new database, and then move the database/logs to the new volume?
Thanks for any advice!
The Real Person!
The Real Person!
Moving a database involves an outage, so it is a disruptive change. So your plan should avoid that if possible. I would create the new database on the new storage location that you want it to live permanently on, and then simply move mailboxes to it.
Yes, avoiding an outage would definitely be ideal. So, in your scenario, there would not be an outage? I would also need to move over the ‘Logs” folder also? Currently, we have the DB files and log files in the same volume. At that point after the move to the new location, we should be able to remove the volume that housed the original databases?
Thanks!
The Real Person!
The Real Person!
Mailbox moves occur online and the only disruption to the end user is the final cutover, which takes a few minutes. And you can control the timing of that, so it is effectively non-disruptive for end users.
If instead you choose to move the database, then yes you need to move logs as well. In the article above I demonstrate how both are moved with the Move-DatabasePath cmdlet.
The database and log files for non-replicated databases should be on separate volumes as a best practice.
To replicate to the other server in the DAG, can I just select the ‘Add database copy’ in EAC and point to the other server? Before removing the old volume, do I need to do anything in Exchange (i.e. dismount databases,…etc)?
Thanks again!
The Real Person!
The Real Person!
See “managing database copies”:
https://www.practical365.com/exchange-2013-dag-database-copies/
Yes, of course you should move any Exchange databases or any other dependencies off a volume before you remove that volume.
I was able to delete the database and recreate, then add the database copy successfully on the other DAG member. The only problem I had was when trying to remove the old log directory before the recreation – seems that there was a corruption with the incseed folder – perhaps that could have caused the problem with me not being able to reseed the database? I was able to rename the log folder though to allow me to reuse the name for the new database.
Cheers,
Andrew
The Real Person!
The Real Person!
Perhaps the folder was locked by your antivirus software because you haven’t set the recommended exclusions.
I had tried the reseed process with AV disabled, but had the same result.
I’m in the process of moving the mailboxes off the database and I will then remove it and recreate.
Cheers,
Andrew
The Real Person!
The Real Person!
So there is AV… but have you configured the required exclusions?
“Disabled” is pretty meaningless for a lot of today’s AV/security products. They are often still running and messing with stuff even when you’ve disabled them.
Great article, however, I have a strange problem that still exists. I was decided to move a database to another drive on the server as I wasn’t able to seed it to the other server in the DAG. It would get close to the end of seeding and then log an event 107 to say a serious I/O error had occurred. As I wanted to eliminate the storage I followed your guide and successfully moved the database to a different drive, however, when it came to adding the server into the DAG and seeding, it threw the same error. (I should also note that I had seeded 2 other databases that were bigger than this on the original drive without issue). The database is mounted on 1 server and Healthy, but I really need to have it on the other for redundancy.
The servers are 2012R2 VM’s and my next thought is to try replacing the current E1000 NICs with VMXNET3’s – although they didn’t cause any issues when reseeding other databases.
Any ideas would be appreciated.
Cheers,
Andrew
The Real Person!
The Real Person!
Are you running antivirus on the servers, and if so have you configured the recommended exclusions for Exchange?
Pingback: Exchange Server 2013: 데이터베이스와 로그 파일 이동하기(DAG 환경) | 아크몬드넷
I am about to move a 500gb database to a new volume and was wondering if anyone has a rough amount to time this will take to not affect users too much. The data is on extremely fast drives on the same drive array.
I ran the command move-databasepath -identity “Mailbox Database 1439531171.edb” -edbfilepath “e:MicrosoftExchangeDataMailbox Database 1439531171.edb” to move the database to the new path. Was logged into and running the command from my exchange server. However, I get the error:
The operation couldn’t be performed because object ‘Mailbox Database 1439531171.edb’ couldn’t be found on ‘domaincontroller.corp.blah’.
When I run
[PS] C:Windowssystem32>get-mailboxdatabase -identity “mailbox database 1439531171”
it shows me the correct server:
Name Server Recovery ReplicationType
—- —— ——– —————
Mailbox Database 1439531171 EXCH2013 False None
How can I get it to look on the exchange server for the database?
The Real Person!
The Real Person!
There’s no .edb on the end of the mailbox identity/name.
Thank you for a great article. For me, the “Check Database is Mounted” section failed after the change until I realised ECP keeps the old display name, despite moving everything else perfectly and correctly naming the database after the move. To check it worked and change the display name
https://yourexchangeserver/ecp
Log on with an administrative account
Click Servers
Select the database with the old name ie Mailbox Database 1234567890
Edit using the pencil
Change the display name to Mailbox Database 1 (you will see at this point that your database really is on E: and it is actually named “Mailbox Database 1”
Thereafter Exchange Administrative Shell commands work for “Mailbox Database 1”
I hope this helps anyone else wondering why they get an error running the following command after a move
Get-MailboxDatabase -Status “Mailbox Database 1” | Select Name,Mounted
Hi Paul
How this operation can be performed when a DB is replicated as part of a DAG?
Regards
Ernesto
Thanks!
I move it from there temporarily, but in some doubt for further side effects,
that may arise later.
OK moved DB&Logs!
How about some leftover dir –
22D2AF5B-1709-4568-BCAC-B7A78E9805D212.1.Single
in the old base location can I trash it?
The Real Person!
The Real Person!
Yep.
Thank you so much …
So you are adviseing add this new database in existing DAG
I have same size of db size 14 TB on DR location also, so once I move mailbox from old db to new db it will replicate to passive copy which is in DR location, am I correct?
The Real Person!
The Real Person!
Yes. Create the new database on one of your DAG members, then add a copy of that database to your other DAG members. Everything you migrate into that new database will then automatically be replicated to the other copies of that database.
Hi Paul,
I have exchange 2013 which have 2 DAG’s with 2 DB’s, which is running X (SAN)Storage , I need to migrated to Y (SAN) storage without impacting users , Due to lack of storage space in existing SAN future requirement
Please advice migration method
The Real Person!
The Real Person!
Create new databases on the new storage. Do mailbox moves to migrate the mailboxes. Remove the empty databases from the old storage when finished.
Hi Paul,
Thanks your advice ,
1. How to calculate, how many mailbox’s. I can be migrate in a days, As I have 14 TB Data ( is any calculator available )
2. Are you advising to Create New DAG for New database on new SAN, then move mailboxes from source DB to New Target DB ?
Please advise
The Real Person!
The Real Person!
1. Move some mailboxes and work out how fast they’re moving, then use that to calculate how long the rest of your migration will take.
2. I see no reason to create a new DAG.
“This operation cannot be performed on a remote server. Please use the -ConfigurationOnly option and then manually move the files” From every server I have run this command on regardless of where the log files and the db files are located.
Command simply does not work in any way at all from what I can see. Same error when logged into the server hosting the db and logs as when not.
Pingback: Move Exchange 2013 Database File and Log Folder Paths | ODDYTEE
It’s been high time I thanked you for all those great tips you post on this blog, you’ve saved my bacon on more than one occasion already!
Keep up the great work!
Hi Paul,
I have an Exchange 2013 server which is also a DC and DNS server. Now, I need to move it from there to a new server and remove the current server from my environment. The exchange is running on Microsoft Windows 2012 R2. Is there any step by step guide?
Thank you,
Tofik
Hi All
I have inherited an exchange 2013 environment with a misconfigured DAG.
It was initially configured with four servers (two DAGs with two nodes per DAG).
I have reconfigured so that there is one DAG with all four MBX members as nodes.
Unfortunately, when attempting to add-databasecopy I get this error –
An existing database is already configured with the same location “E:logs” for LogFolderPath.
So, I need to to move the databases to each of there seperate folders.
Currently set wtihout seperate folders :-/ lumped under a folder called databases and a log folder called Logs.
I am better to create new databases? What is the process for moving a DAG database and Log path?
Thanks for your help and good article.
S.
The Real Person!
The Real Person!
So let’s say you’re trying to add a copy of DB01 to SERVER03… but SERVER03 already hosts a *different* database in the same DB/log paths as DB01.
If that is the case, and that database has only a single copy right now, then you should be able to do the database move as shown in the article. It is only an issue moving database paths in DAGs for databases with more than one copy as far as I know.
Hi Paul,
I just wanted to confirm, we are Exchange 2013 SP1 in DAG. We have 1 Active and 1 Passive copies of all DBs. Currently we have all DBs are in separate folders. Ex: DB1 has a separate folder on F:DB1 and this folder has DB1.edb and DB1 Logs as well. DB2 has its own separate folder F:DB2 and this folder has DB2.edb and DB2 logs.
Do I need to move EDB files and Log files of same DB in separate folders as well?
Thanks,
Raman
Worked for me, thanks Paul
I’m trying to move the database on exchange 2013. We are running exchange server using hyper-v on server 2012.
I RDP into the mail server, open an exchange management shell using admin priv, but when the shell opens I get the warning ” Cant generate Export-module for the current session using Import-PSSession”
When I run the command: “Move-DatabasePath “Mailbox Database xyz” -EdbFilePath “D:mailstoreMailstore1.edb” -LogFolderPath “D:Mailstore”
I get an error that the term ‘move-databasepath’ is not recognized.
The Real Person!
The Real Person!
Your Exchange shell isn’t initialising correctly. Sounds to me like you are logging in with an account that does not have Exchange admin rights.
To avoid any other issue, last option is to create new DB and its copy on other DAG member, move all users in New db, so that you can have alteast backup of that DB in the shape of DB copy in DAG.
Like I said though, that is a bit extreme and I’d rather understand and fix the problem so that if it happens to another database I can resolve again.
Yep.
The command should use the healthy source server by default, but I have also tried casting it explicitly.
Again, thanks.
have you tried this command with healthy source server switch, if it works
Update-MailboxDatabaseCopy “dag2db1mbox1” -CatalogOnly -sourceserver
Hi Nausherwan,
Thanks for your reply.
I have been trying to resolve for 4 days. It is only a 5Gb database (7 users)
I have tried manually updating the database copy, no change.
Also tried:
…Rebooting
…Changing the Activation Preference
…Removing the search folders (with Search services stopped and restarted)
…Added ContentSubmitters AD Group (again with appropriate service stops and starts)
Since Exchange 2013 (CU3) on 2012R2, not sure if I should modify the Troubleshoot-CI.ps1 to use the 2013 registry settings (Microsoft seem to have not updated the script for 2013… frustrating)
I have other databases on this DAG, including new ones created in the past 2 days and no other issues.
My last option seems to be to create a new mailbox database, add the copy, test replication, then move the users to the new mailbox database, finally retiring the old one. This seems extreme but I’m sure would fix the problem. My concern is if this happens to other mailbox databases…..
Thanks
Hi Graeme,
I faced the same issue, after moving database location to new path, kindly update manually database copy (reseeding) and wait for 1-2 days, it all depends on the size of db file, when it will converge, content index state will be in healthy state.
Regards,
Hi Paul,
I needed to move one database (part of a DAG) to a new location…
I removed the database copy and then successfully moved the location, remounting without issue.
I then added a new database copy and allowed it to recreate the copy on the 2nd DAG member from scratch.
All went well.
However… Although the Passive copy is Healthy, the Content Index State is FailedandSuspended and none of your previous tips help.
I have tried removing the copy again, and recreating it again but to no avail.
Do you have any suggestions?
Thanks
The Real Person!
The Real Person!
If doing a reseed of the catalog only isn’t working try stopping search services on the failed node and deleting then content index folder for that DB copy, then start the services again. Give it 15-30 minutes to sort itself out then see if its healthy after that.
Edit: I probably should have read the whole conversation below first. Looks like you’ve already done this.
Thanks Paul,
I had already tried that.
Do you have any experience with the Troubleshoot-CI scripts on Exchange 2013?
Otherwise, looks like my only remaining option is to create a new DB and migrate the users mailboxes.
Hi Paul,
Thanks for this instructive article, as usual on all your site!
Since the process you described cannot be followed while my current database is on a 2 nodes DAG (2013 version),
should i remove the DAG first and then recreate it again or is there a specific process allowing me to preserve it while doing the change ?
Just to mention that i want to change the database location on only one node (in fact from one iscsi volume to another inside that same node)
Thank you for your help.
The Real Person!
The Real Person!
The storage path for a database has to match on each DAG member that hosts a copy of the database. You can’t change the path on just one DAG member.
I want to move my database file path only, I am running exchange 2013 CU2 in production. All databases are running in DAG and they have copies on other server, I want to change 4 Databases path from current location to other at both DAG members.
Please confirm me about how to do this
works great thnx! 🙂
Hello, I want to move the log files to different directory, i just want to know if i move the logs will the database be dismounted during the log move??
Thank You
The Real Person!
The Real Person!
Yes it will.
For some reason I can not view my database in the EMC Servers > Database page of the ECP. I was able to move it through the shell but now can not see it to mount/dismount in the ECP? Any ideas why? Mail is flowing and everything else appears to be working. Thanks.
The Real Person!
The Real Person!
EMC, ECP, or EAC?
Did you ever get a solution to this?
Mine is the same- in the ECP under databases nothing shows, unless I use the magnifying glass and search for it
Mail flows and the connectors are working as expected
Any ideas why this could be?
THat is great info on how to move a database.
How does one change the DEFAULT database location, or do we have to set it each time we create one?
The Real Person!
The Real Person!
If you run “Get-MailboxServer | select *datapath*” you’ll see the default data path. If I recall correctly it can’t be changed via a PowerShell command but can be changed using ADSIEdit.msc
Great article !
Thanx
It’s important to be careful when making this kind of move. You want to make sure that all of the data transfers over properly. This is something that has people nervous about the upgrade in the first place.
Pingback: Installing an Exchange Server 2013 Database Availability Group
So does Exchange 2013 not provide a way to move database file location from EAC ?
Sachin
The Real Person!
The Real Person!
Correct, the EAC doesn’t perform this task.
Dear Paul,
can you add the steps while using a DAG with DataBaseCopies?
1) Suspend-MailboxDatabaseCopy -identity “Mailbox Database 1\PASSIVE_NODE_NAME”
2) robocopy E:\Mailbox Database 1\ “F:\Mailbox Database 1\Mailbox Database 1.edb” /MOVE /SEC
3) Move-DatabasePath “Mailbox Database 1” -EdbFilePath “E:\Mailbox Database 1\Mailbox Database 1.edb” -LogFolderPath “F:\Mailbox Database 1”
4) Mount-Database -Identity “Mailbox Database 1”
5) Add-MailboxDatabaseCopy -Identity “Mailbox Database 1” -MailboxServer “PASSIVE_NODE_NAME”
6) Resume-MailboxDatabaseCopy -Identity “Mailbox Database 1\PASSIVE_NODE_NAME”
7) Update-MailboxDatabaseCopy -Identity “Mailbox Database 1\PASSIVE_NODE_NAME” -CatalogOnly
😉
Cheers
Kory
Sorry, forgot one Thing between 2) and 3):
On PASSIVE NODE:
Remove-MailboxDatabaseCopy -identity “Mailbox Database 1\PASSIVE_NODE_NAME”
The Real Person!
The Real Person!
Those steps are not correct, even with your second comment. I don’t recommend using this method to move databases in a DAG. Aside from the errors, you’ve reduced the redundancy of the DAG by removing a database copy, and you also cause an outage.
Better to create a new database in the new path, with database copies, and move mailboxes to the new database using move requests.